info@csceramic.com
-
TG DSC DTA Sample Carriers Type S（PtRh） Sensors For Netzsch STA 409 PC/409 CTG DSC DTA Sample Carriers Type S Sensors For Netzsch STA 409 PC/409 C -
Dual Beam Thermocouple Kit equivalent to Hitachi GAA-0628 For TG/DTA6200,6300For Hitachi TG/DTA6200,6300 with replacement procedure manual. -
Sample holder thermocouple N5202007 suit for PerkinElmer STA 8000PE N5202007 for PerkinElmer STA 8000 thermocouple for temperature measurement. -
HAAKE Aluminum Rheological Parallel Plate For RheometerHAAKE aluminum rheological parallel plate is a versatile and essential component designed for precision rheological testing, ensuring the accuracy of laboratory experiments and material analysis processes. -
Moisture Analysis Aluminum Sample Pans for Mettler Toledo Moisture AnalyzersMoisture analysis aluminum sample pans ensure optimal testing conditions for all applications. Get accurate moisture results by regularly replacing the aluminum sample pan to avoid residues and deformation. -
Hangdown Wire Kit - Quartz equivalent to PerKinElmer N5320140 for TGA 8000 / PYRIS 1 TGATGA quartz hangdown wire for TGA 8000/PYRIS 1 TGA.Hangdown wires suspend down from the TGA furnace balance mechanism and catch a sample pan's stirrup, lift the pan from the Autosampler and into the furnace. -
Quartz Probes Expansion Probe Thermomechanical Analyzer Probes For TA TMA Q400/TMA 450Quartz Probes For TA TMA Q400/TMA 450.They are designed to be used in expansion,penetration,flexural and tension modes of deformation and are used to determine coefficient of thermal expansion,shrinkage,softening points,sintering temperatures, elongation and much more. -
Sample Stage equivalent to TA 944120.901 TA 944120.901 For TA Discovery TMA 450/450EM and Q400/Q400EMTA 944120.901 Thermomechanical Analyzer Quartz Sample Stage for TA TMA Q400/TMA 450. This quartz stage serves as a sample holder, allowing for precise sample support during measurements. -
-
-
TMA Thermocouple Kit equivilent to TA 944344.902 for TA Discovery TMA 450/450EM and Q400/Q400EM and 2940TA 944344.902 for TA TMA Q400/450 High Temperature Thermocouple for temperature measurement. -
Thermocouple Beam Assembly TA 963881.901 For TA Discovery SDT 650TA 963881.901 FOR SDT 650 DSC TGA Thermocouple Temperature Sensor for temperature measurement. -
Furnace Lid（ Inner lid insulation )equivalent to PE N5202029 For PerkinElmer STA 8000Laboratory furnace lid/cover is specifically designed for the PE STA 8000.The furnace cover is made of polycrystalline high-density alumina fibers and is resistant to high temperatures. -
180 µL Quartz Sample Pans kit equivilent to TA 957210.902 For TA Q5000 SA ,Discovery TGA (55/550/5500) and Q5000 IR ,TGA-HP and VTI-SA Sorption AnalyzersTA 957210.902 Semispherical quartz crucibles sample pans designed primarily for use with the TA Q5000 SA. Sample pans may be reused for subsequent analyses with proper handling and cleaning. -
Thermal Analysis Sapphire Discs Specific Heat Slices Set For DSC TA Q10/Q100/Q20/Q2000/Q25/Q2500The sapphire specific heat slices is designed for use in TA thermal analyzers. -
Silver Capsules D4*H3.2mm 502-206 For Elemental AnalyzersSilver Capsules 502-206 should be used for carbon, hydrogen, nitrogen,and sulfur determination, they are compatible with Leco TruSpec Micro,CHN-900/CHNS-932,and VTF-900 instruments. -
5ml Alumina Crucibles equivalent to NGB809163 For TGA Sample Carrier Of The Netzsch STA 449 F1/F3/F5 Jupiter® STA 449 F3 NevioNetzsch special shape crucibles for TGA sample carrier of the STA 449 F1/F3/F5 Jupiter®,STA 449 F3 Nevio. DSC Crucibles for Measurements in a Pressure-Tight Environment. -
4.2ml Alumina Crucibles For TGA Sample Carrier Of The Netzsch STA 449 F1/F3/F5 Jupiter® STA 449 F3 NevioNetzsch special shape crucibles for TGA sample carrier of the STA 449 F1/F3/F5 Jupiter®,STA 449 F3 Nevio. -
Copper Sticks 502-189 For LECO CHN-900/CHNS-932 VTF-900 TruSpec ON/O/N/736-SeriesCopper Sticks are used to remove oxygen(O) from inert carrier gas. Suitable for LECO CHN-900/CHNS-932, VTF-900, TruSpec, ON/O/N/736-Series. -
Copper Sticks 502-304 For LECO CHN-900/CHNS-932 VTF-900 TruSpec ON/O/N/736-SeriesCopper Sticks are used to remove oxygen(O) from inert carrier gas. Suitable for LECO CHN-900/CHNS-932, VTF-900, TruSpec, ON/O/N/736-Series.
+86 18273288522