Silicon Carbide Spray Nozzle for Desulfurization,Sic Full Cone Spray Nozzle

Silicon Carbide Spray Nozzle for Desulfurization ,Full Cone Spray Nozzle

Sic Products Description :

The material of siliconized silicon carbide has a series of basic superiority and characteristics. Many products can be made from it such as beams, rollers, cooling air pipes, thermal couple protection tubes,temperature-measuring tubes, sealing parts, and special shaped parts.

Siclicon Carbide Product Propeties :

Spray Nozzle Specifications :

 Features and Benefits:                                    

1)Hollow cone spray pattern with a ring-shaped impact area;      

 2)Spray consistency is uniform;
3)Spray liquid droplets distribute at a large range ;
4)the spray liquid droplet size is 20-80% smaller than other hollow cone shaped nozzles.The graph given below is the compare data between AASW spray nozzle and common hollow cone shaped nozzle at the same flow rate ,it is easy to find that the spray liquid droplets of AASW spray nozzle distribute at a large range ,that it can minimize the spray consistency consumedly ,meanwhile,its droplet size is 50% smaller than common hollow cone shaped nozzles;
5)One-Piece cast-type modes. 

Sic Spray Nozzles Applications:

1.Coal-fired power plants,large boiler,desulfurization dust removal equipent of key components;

2.In high temperature,high wear and tear,strengthen learning,working in harsh environments such as high corrosion has a long service life,spry droplet distribution uniformity,can achieve excellent coverage,flow channel,unobstructed, without jam phenomenon.

Nozzles packing and shippment :

CS’s Silicon Carbide Products are carefully handled to minimize damage during storage and transportation and to preserve the quality of our products in their original condition.

Use/Maintenance Methods :

1.In a wide range of pressure, can provide uniform spary distribution,A continuous and stable slurry injection pressure is required.

2.The factor to measure the spray efficiency is the size of the droplet formed by the nozzle under a given pressure. That is, the curve of the relationship between the injection pressure and the average particle size of the spray, defined as the average Sauter Diameter SMD-Sauter Meam Diameter. The spray particle size is small, and the area of contact with the smoke is large, which is conducive to the chemical reaction. However, the spray particle size should not be too fine, otherwise the effect of spray washing and the consumption of spray pressure is not high. The atomization particle size D32 required by the general process is 2000-3000μm.

3.To achieve uniform distribution of spray while providing a large free channel to ensure good anti-blocking performance.

4.Excellent corrosion resistance,can withstand the slurry continuous strong long-term scour.