-
2018-06-04
According the content, alumina ceramics are classified by #75, #85, #92, #95 and #99 ceramic, also with some more detailed categories. At present, #95 ceramic has the largest production, and it is most widely used in the market. With high hardness and abrasive resistance, and small dielectric loss, its performance can fulfill most of the industry technical requirements, which is much better than #...
-
2018-08-21
1.Melting sample by the heat released during combustion process, and adding fluxing agent can decrease melting point. 2.Not only fluxing, tungsten-Tin accelerator also has function of heat release, acidity-alkalinity adjustment of medium, mixing, catalyzing, stabilizing combustion, anti-interference, etc. 3.Tungsten-Tin accelerator is widely used in high frequency furnace, and it can fulfill techn...
-
2018-08-10
Dedicated carbon sulfur crucible is main consumable of high frequency infrared carbon sulfur analyzer, usually it can be used only one time so consumption is large. Meanwhile, quality requirement to crucible is very high for low or super lower carbon/sulfur content sample test. Acceptance standard: dedicated carbon sulfur analyzing crucible, factory inspection for 100 piece Item 1: appearance insp...
-
2019-01-16
Aluminum crucible is the main supporting tool in thermal analyzer and the carrier of sample. Aluminum is a silver-white metal, which is protected from reaction with air and water due to its surface oxide layer. It is easily soluble in dilute sulfuric acid, nitric acid, hydrochloric acid, sodium hydroxide and potassium hydroxide solutions, and hardly soluble in water. Relative density 2.70. Melting...
-
2019-01-21
Advantages of Thermal Analysis Crucible Cover: Improving the temperature distribution in the crucible is conducive to uniform temperature inside the reaction system. Effectively reduce the influence of radiation effect and sample color. Prevent the flying of extremely light fine sample powder and prevent it from drifting away with the dynamic atmosphere or being taken away in the process of vacuum...
-
2019-03-08
Aluminum crucible is the main supporting tool in thermal analyzer and the carrier of sample. Aluminum is a silver-white metal, which is protected from reaction with air and water due to its oxide layer on the surface. It is easily soluble in dilute sulfuric acid, nitric acid, hydrochloric acid, sodium hydroxide and potassium hydroxide solutions, while hardly soluble in water. Relative density 2.70...
-
2019-03-20
Differential scanning calculation (DSC) is a technique that under temperature control program, used to determine the relationship between the heat flow rate or power difference of samples and reference materials, and temperature or time under program control temperature. DSC has been widely used in the fields of material processing, chemistry, medicine, biochemistry, petroleum, aerospace, environm...
-
2019-03-25
25.44 26.12 26.68 27.18 27.63 28.07 28.52 29.00 29.53 30.11 30.75 31.43 32.17 500 24.88 25.57 26.14 26.62 27.06 27.48 27.91 28.37 28.87 29.43 30.03 30.70 450 24.36 25.06 25.63 26.11 26.54 26.95 27.36 27.79 28.26 28.79 29.37 400 23.85 24.58 25.16 25.65 26.07 26.46 26.85 27.26 27.71 28.21 350 23.37 24.12 24.73 25.22 25.64 26.03 26.40 26.79 27.21 300 22.89 23.68 24.31 24.82 25.25 25.63 25.99 26.37 25...
-
2019-04-16
1. Introduction to Thermal Analysis Thermal analysis (TA) is a technique that records the functional relationship between physical properties and temperature of sample under the programmed temperature conditions. The most commonly used TA methods are differential thermal analysis (DTA), differential scanning calorimetry (DSC) and thermogravimetry (TG). The most commonly used thermal analysis cruci...
-
2019-05-09
Advantages of lidded Thermal Analysis Crucible: Improving temperature distribution in the crucible, which favors uniform temperature inside the reaction system. Effectively reducing the influence of radiation effect and sample color. Preventing extreme light sample powder from flying and drifting away with the dynamic atmosphere or being taken away in the process of vacuum purge. Sensor can be eff...
-
2019-08-11
Recently, as advanced ceramic industry has developed rapidly, more and more kinds of ceramic products are being used in various industries, and many new ceramic materials have been developed, especially zirconia ceramics and alumina ceramics. Among them, zirconia ceramic crucible, alumina ceramic crucible, zirconia ceramic pans and alumina ceramic pans are widely used for melting experiments of me...
-
2019-08-11
Alumina ceramic crucible is widely used in experimental analysis for its excellent performance, and satisfactory lifespan. However, to ensure the performance and lifespan of a crucible, it is very important to hand, operate and maintain it correctly, so i/n the current article, a care guideline of alumina ceramic crucible will be introduced for users. 1.Checking crucible for crack or d...
-
2019-08-13
In recent years, with development of new energy source and IT industry, silicon-based technologies are attracting more and more attention, and always play a significant role in the so-called new science and technology revolution. One example is solar energy market, in which silicon-based materials dominate a market share of over 90 percent. To secure its strong position within the energy industry ...
-
2019-09-03
According to the report “Ceramic Tube Market by Material Type (Alumina and Zirconia), Application (Electronics and Electrical and Medical and Healthcare), and Region (North America, South America, Asia-Pacific, Middle East and Africa, and Europe) – Global Forecast to 2022″, it can be estimated that the ceramic tube market is expected to grow from USD 691.1 million in 2017 to USD 993.3 million by 2...
-
2019-09-05
Ceramic tube is a new type of material which is formed by sintering zirconia and alumina ceramic materials. Ceramic tube is formed by isostatic pressing, hot pressing, dry pressing and other processes, and then waxed or degreased and then sintered at a high temperature. Ceramic tubes are used in aerospace, medical equipment, military machinery and other fields. Ceramic Tube Material Classification...
-
2019-10-29
Minerals containing Alumina represent some 15% of the earth's crust. It is therefore an abundant material and virtually inexhaustible, unlike raw materials for many alloys developed for special applications. The combination of high thermal conductivity, low thermal expansion and high compressive strength leads to good thermal shock resistance, so alumina is suited to furnace use such as crucibles,...
-
2019-11-01
With developments of electronics, heat radiation of circuit boards and components are also showing an increasing level, which result in more and more studies on heat radiation materials for high efficiency. Alumina is very suitable for fabricating heat radiation materials because of its high thermal conductivity and low electrical conductivity. In particular, if alumina rods are lined up in the di...
-
2022-07-01
Alumina ceramic is a kind of ceramic product with aluminum oxide as the main component. In this article, influence of forming method and processing details on hardness and abrasion of alumina ceramics are briefly introduced. * Forming Methods of Alumina Ceramic 1.Dry Pressing: This type of forming method is only suitable for product with simple-structure, whose inner thickness is larger than 1mm a...
-
2022-07-27
Zirconia ceramic is a kind of new ceramic material with white color, when contain some impurities it would be yellow or gray. It is widely used in various industries for its features of broken resistance, wear resistance, high hardness, high-temperature resistance, superior corrosion resistance, no rust, insulation and oil-free self-lubrication. In this article, manufacturing procedures and machin...
-
2022-08-03
Alumina ceramic crucible is a vessel or melting pot, which is made of refractory materials. It is mainly used for evaporation, concentration or crystallization process of solutions and firing process of solids. Table of Contents: Alumina Ceramic Crucible Instructions Application methods of alumina ceramic crucibles Crucible and Lid Heating with Crucible Support Apparatus Cooling Handling wit...