Ceramic Crucible Leco 528-018. Manufacturer of carbon sulfur crucible & cs crucible for LECO CS230. Eltra 90148/90149/90150/90152 Horiba 905.200.380.001 Bruker: JW-N009250423 Alpha AR3818 SerCon: SC0893 LECO528-018/002-301/002-302 Elementar 905.200.380.001 AN. Used for Carbon sulfur Analyzer Elemental Analysis.
Read MoreAlumina tubes both sides open are commonly used in various industrial and laboratory applications. They are ideal for use in processes such as heating, cooling, and drying, and can offer superior thermal and electrical insulation.
Read MoreAchieve unparalleled levels of purity with our Bone Ash Cupels. Engineered to remove impurities and unwanted elements, these cupels enable you to extract the true essence of your precious metals.
Read MoreAlumina Ceramic Substrate Sheet is an ideal choice for applications requiring high performance, reliability, and durability. It is available in various sizes and thicknesses to suit different applications.
Read MoreAlumina pipes advantage:high heat resistance,good cold-resistance heat-resistance,resistance to acid and alkali corrosion. Long service life. OEM is accpected.
Read MoreAlumina crucible and boat are wildly used in laboratory and industrial analysis as well as metal and nonmetal material sample melting.Available in various sizes and shapes.
Read MoreCircle alumina ceramic rods have a higher strength to weight ratio than other ceramics, and can be used to manufacture lighter and stronger parts.Available in a variety of sizes and shapes.
Read More952018.906 100μl Platinum/Pt Crucibles(Sample Pans) for TA Instruments TA Q500/Q50/TGA 2950/2050. Manufacturer for TA crucibles and DSC sample pans. TA Instruments tga analyser good alternative sample cups.
Read MoreME-00024123 DSC Alumina crucibles sample pans for Mettler TGA/sample robot measurements. Manufacturer for Mettler Toledo crucibles,sample pans and dsc consumables.
Read MoreZirconia ceramic are used in shaft, plunger, sealing structure, auto-mobile industry, oil drilling equipment, insulation parts in electrical equipment, ceramic knife, ceramic hair clipper spare parts, with high density, bending strength and breaking tenacity. We can supply the products according to customer's drawings, samples and performance requi1
Read MoreSiC spray nozzle full cone is a nice choice as a key component for desulfurization and dust removal in thermal power plants, due to its high hardness, erosion resistance, corrosion resistance, and oxidation resistance.
item no. :
CS-THG-DN32-1Color :
BlackPort :
Shenzhen China, Express deliverylead date :
5-7 daysMaterial : Silicon Carbide
Purity : 92%
Shape : Spiral
Original Country : China
1. High temperature resistance: Silicon carbide spray nozzles can withstand temperatures up to 3000°F (1649°C) without deteriorating.
2. Long-lasting: Silicon carbide is an extremely hard and durable material, making it a great choice for long-term use.
3. Corrosion-resistant: Silicone carbide is highly resistant to corrosion, making it an ideal choice for corrosive environments.
4. High pressure capability: Silicon carbide spray nozzles can handle high-pressure applications, up to 10,000 psi.
5. Lightweight and compact: Silicon carbide spray nozzles are lightweight and compact, making them easy to install and maintain.
Sic Nozzle Applications
1.Used in a variety of applications, including high-temperature spraying, chemical etching, and abrasive cutting.
2.Use in applications that require high pressure and high temperatures, such as those found in industrial furnaces.
3.Can also be used in combination with other materials, such as stainless steel and tungsten, to create custom nozzle designs.
4.Highly resistant to corrosion and can withstand temperatures up to 2000°F.
5.Their wear-resistant properties make them ideal for abrasive applications, while their high melting point makes them suitable for high-temperature processes.
6.Silicon carbide spray nozzles are also frequently used in powder coating applications.
Item | (RBSC) | (NBSC) |
Materials | 8%Si+92%SiC | 75%SiC+ 23%SiN |
Temperature tolerance limit | 1380℃ | 1600℃ |
Density | 3.0 g/ cm 3 | 2.5 g/ cm 3 |
Indicated Parosity | 0% | 16% |
Flexural Strength | 260MPa(20℃) | 60MPa(20℃) |
Elastic Modulus | 330 GPa(20℃) | 150 GPa(20℃) |
Thermal Conductivity | 45W/m.k(1200℃) | 15W/m.k(1200℃) |
Coefficient of Heat Expansion | 4.5 K -1X10 -6 | 4.5 K -1X10 -6 |
Moh's hardness | 13 | 10 |
acid & alkali proof | Excellent | Excellent |
Item | Size(inch) | Flow rate(m³/hour) | Scope(m) | Purity | Link mode |
CS-THG-DN32-1 | 1.2" | 10~13 | 1.2-1.5 | 92% | Spray |
CS-THG-DN40 | 1.5" | 13~17 | 1.2-1.5 | 92% | Spray |
CS-THG-DN25A-1 | 1" | 5-10 | 1.2-1.4 | 92% | Spray |
CS-THG-DN65-1 | 2.5" | 25~35 | 1.6-1.8 | 92% | Spray |
CS-THG-DN50 | 2" | 19~30 | 1.6-1.8 | 92% | Spray |
CS-THG-DN80 | 3" | 45~65 | 1.7-1.8 | 92% | Spray |
CS-THG-DN15-1 | 4" | 2-3 | 1.1-1.2 | 92% | Spray |
CS-THG-DN40-1 | 4" | 45~65 | 1.7-1.8 | 92% | Spray |
CS-THG-DN20-1 | 6分 | 3-5 | 1.2 | 92% | Spray |
Nozzle Test standards
1.The testing standards for silicon carbide spray nozzles vary depending on the type and application of the nozzle.
2.Generally, the nozzle should be tested for flow rate, spray pattern, and spray droplet size. Flow rate tests measure the rate at which the nozzle can deliver a given amount of liquid and should be conducted in both the forward and reverse directions.
3.Spray pattern tests measure the shape, size, and distribution of the spray and should be conducted at various pressures and angles.
4.Finally, spray droplet size tests measure the size of the droplets produced and should be conducted at different pressures and angles.
5.For safety and performance reasons, it is strongly recommended that nozzles be tested to applicable industry standards or regulations before use.
6.Additionally, many countries and regions have specific laws and regulations that must be when testing and using spray nozzles.
Customize Requirements
1.At Hi-Tech Ceramics, we specialize in customizing spray nozzles for our customers.
2.We can design and fabricate spray nozzles with Silicon Carbide material in any size, shape, and configuration. Our team of technicals can help you determine the best material and design for your application.
3.We can also provide engineering assistance to optimize the design of your nozzle and increase its performance.
Nozzle's Packing and Shippment
CS’s Silicon Carbide Products are carefully handled to minimize damage during storage and transportation and to preserve the quality of our products in their original condition.
SiC Nozzle's Use/Maintenance Methods
1.In a wide range of pressure, can provide uniform spary distribution. A continuous and stable slurry injection pressure is required.
2.The factor to measure the spray efficiency is the size of the droplet formed by the nozzle under a given pressure. That is, the curve of the relationship between the injection pressure and the average particle size of the spray, defined as the average Sauter Diameter SMD-Sauter Meam Diameter. The atomization particle size D32 required by the general process is 2000-3000μm.
3.To achieve uniform distribution of spray while providing a large free channel to ensure good anti-blocking performance.
4.Excellent corrosion resistance,can withstand the slurry continuous strong long-term scour.
Why Choose US
1. If there are drawings, please send drawings (CAD,PDF, hand sketch), etc.
2. Specify the size, quantity, thickness and other specifications.
3. Determine the processing technology (simple cutting, drilling, to map custom parts, grinding, milling saw cutting.
4. Pay according to the actual quotation.
Note: If the size requirements are particularly accurate, please explain to customer service. Because there are certain tolerances in normal process standards such as cutting, grinding and drilling, please explain in advance if there are precision requirements for irregular parts.
FAQ
1.Q: What is a silicon carbide spray nozzle?
A: Silicon carbide spray nozzles are a type of spray nozzle used to disperse a mist of liquid or gas. They are made from a silicon carbide material, which is extremely hard and highly resistant to wear and tear. Silicon carbide nozzles are ideal for applications where a high level of precision and accuracy is required.
2.Q: How long do silicon carbide spray nozzles last?
A: Silicon carbide spray nozzles can last for many years with proper use and maintenance. The wear-resistant nature of silicon carbide makes it highly durable and able to withstand the rigors of industrial applications.
Q: What advantages do silicon carbide spray nozzles have over other types of nozzles?
A: Silicon carbide spray nozzles have several advantages over other types of nozzles. They are extremely durable and resistant to wear and tear, have higher operating temperatures, and have superior corrosion resistance. Additionally, they are more efficient and provide better atomization of the liquid or gas being sprayed.
SiC Ceramics
The material of silicon carbide is extremely durable, heat resistant and corrosion resistant. A variety range of industrial ceramic products can be made from it such as beams, rollers, cooling air pipes, thermal couple protection tubes, temperature-measuring tubes, sealing parts, and special shaped parts.
RBSIC SISIC refractory reaction bonded silicon carbide tube silicon carbide burner nozzle to match your existing kiln burners. Using Silicon carbide burner tubing as flame tubes for roller hearth kiln.
SiC vortex nozzles are used for waste gas washing, desulphurization and denitrification, flue gas dust removal, fire prevention and fire extinguishing.
TA 100μl Platinum/Pt Crucibles Platinum/Pt Sample Pans for TA Instruments. Manufacturer for TA crucibles and DSC sample pans. TA Instruments tga analyser good alternative sample cups.
The 100μl Alumina Ceramic Sample Pans P/N 957329.903 For TA Instruments Q5000 are designed to provide reliable and accurate sample analysis. The pans are designed to fit perfectly into the TA Instruments
Alumina ceramic components parts are a cost-effective material choice. Available in various sizes and shapes. Our industrial ceramic parts include tube, rod, plate, disc, wafer, ring, seal, bearing, valves, pump plunger, beam, roller, shaft, screw, washer, sleeve, hunger, spacer, holder, carrier, insulator, fixture, clamp, chuck, nozzle, guide, fra1
300μl Netzsch Alumina crucibles NGB803698/NGB808209, NGB800453/NGB800454 for Netzsch TG 209 F1 Libra® and TG 209 F3 Tarsus® DSC and TGA measurements. Manufacturer for Netzsch crucibles and sample cups. Netzsch Instruments good alternative DSC sample pans.
LECO 528-053 Ceramic Combustion Boat, Alpha AR8053 Eltra 90160. Disposable porcelain boats. Manufacturer of LECO Ceramic Combustion boats.
DSC crucibles, Alumina crucibles sample pans for Mettler DSC and SDTA measurements. Thermal analysis consumables for Manufacturer for dsc polymer Mettler Toledo crucibles and sample pans.
the professional team to service !